Increase Processor and Ram in Samsung Galaxy Pocket

YOU MUST BE ROOTED & THIS PROCESS IS ONLY FOR GALAXY POCKET

Make sure your have a nandroid backup because your phone may not boot at some cases. You to just restore your backup to solve the problem.

* First of all you should place  Riskey Kernel v1.5
in the root of your sdcard
* Now boot to Cwm recovery to flash the kernel
* After flashing the kernel, reboot system

★Now increase Processor
*You will need an application CPU control
which you will use to determine or set the
frequency to whatever you want.
* Just open this app and select the frequency you
want.
Credits :
* Credits goes to riskey of xda developer for this
wonderful development. To check the original
post on xda follow here - xda link
Note:
Overclocking will require more of your battery
power,so be ready for that.

★Now increase Ram

* Download Ram expander and install it.
* Open ram expander and you will notice two
input box, the first one is "size in mb" put 512 mb
or you can increase it to whatever number you
want as long as you a have the required space in
the sdcard(it should not be more than 2gig)
* Secondly you will see a box "swappiness"put 50
or 60.
* Now tick the "active swap"above and wait untill
the application prepare the swap file.
* After this swap memory have now been created
on your device.
Note:
* The screenshot below are just to show that it
works on my device.
* Making swap file may degrade your sdcard life
because the device frequently read and write to
the sdcard
* Do this at your own risk

Source: develasys.tk/2013/03/riskeykernel-v1-0/

NEED ANY ASSISTANCE????
JUST COMMENT BELLOW

AND PLEASE LIKE OUR FACEBOOK PAGE - Android Armv6- Enjoy your phone perfectly